Carifex 105W 7x6 Rectangular Sealed Beam LED Headlight with H4 Plug is the kit you were waiting for. The ultra-high power 105W LED Carifex headlights are able to deliver an incredible light beam the increases your safety while driving at night. Besides their power, our Carifex 105W 7x6 Rectangular Sealed Beam LED Headlight with H4 Plug employs a die-cast aluminum waterproof IP67 housing to ensure a long lifespan and corrosion-free usage. The LED headlights dual-beam design also brings you an unbeatable white beam for both low and high conditions. What are you waiting for? Start enjoying the ultimate LED headlights set for your Jeep!.
High power 105W sealed beam headlight brings you a brighter and clearer sight than normal halogen bulbs and other low quality LED headlights.
High/Low Dual-beam headlight offers you a wider angle and longer lighting distance at night.
Anti-flickering harness included.
Aluminum alloy housing construction dissipates heat more efficiently than other materials meaning that you get a consistent light beam and longer lifespan.
Plug and Play installation using standard sealed beam H4 plug connector.
Fits most vehicles that come originally equipped with 5x7 sealed beam headlights H6054 H5054 H6054LL 69822 6052 6053.
Compatible with vehicles using 12V and 24V systems.
Type: 5”x7” Rectangular LED Headlight
Brand Name: Carifex
Model Name: Carifex 105W 5x7 Rectangular Sealed Beam LED Headlight with H4 Plug
Size: 5-inch (127mm) Length x 7-inch (178mm) Width
Power: 52W each. 105W set
LED Quantity: 13 + 2 LED
Color Temperature: 6000K-6500K
Light Color: White
Operating Voltage Range: DC 10-30V (fits 12V and 24V vehicles)
Caution:the following are general installation guidelines, always read the manufacturer’s official documentation before fitting the LED headlights on your vehicle. In case of doubt, always prefer LED manufacturer assembly instructions.
Confirm the plug type installed on your vehicle. Double-check you purchased the right LED headlight kit before installation.
Depending on your vehicle model-year you may need purchasing separate ballasts and/or CAN-BUS controllers, capacitors, and harness adapters if they are not included in the LED headlights kit. Refer to manufacturer’s documentation and your vehicle owner’s manual for more information regarding LED headlights requirements.
Disconnect the vehicle’s battery for added safety.
Disconnect old halogen wiring connector. You may need to remove a plastic/metallic securing clip before doing so.
Install LED bulbs. Depending on your vehicle, you may need to connect additional elements as follows:
Connect the LED bulb to the LED CAN-BUS controller.
Connect the LED controller to the capacitor.
Connect the capacitor to the wiring harness adapter.
Finally, connect the wiring harness adapter to the vehicle’s wiring connector.
Reconnect the battery.
Turn on the lights and verify everything is working as intended.
Secure the ballasts, CAN-BUS controllers, wiring harness, etc.
Guaranteed Safe Checkout
These headlamps are fantastic. They literally turn night into day on the road. i would recommend them to anyone looking for a sealed beam replacement.