Halogen headlights have been the automotive standard for years. They're cost-effective, easy to replace, and provide decent visibility. However, they generate a lot of heat and have a relatively short lifespan compared to LED headlights.
On the other hand, LED (Light Emitting Diodes) headlights, like the Carifex Compact LED Headlights, offer longer lifespan and better energy efficiency. They're brighter, produce a clear, white light for better visibility, and have a rapid on/off response time.
So, which is better? While both have their merits, LED headlights tend to outshine their halogen counterparts in terms of longevity, brightness, and energy consumption.
If you're considering an upgrade, you might be wondering if it's okay to replace halogen headlights with LED. The short answer is yes, but there are a few considerations.
LED headlights generally use less power and provide better visibility. However, they require proper installation to ensure correct beam patterns and to avoid dazzling other road users. The cooling system for LED bulbs is also larger, so there must be enough room in your vehicle for installation.
LED headlights sound like the perfect choice, but they do come with some disadvantages. First, they're usually more expensive than halogen bulbs – both in terms of initial cost and replacement.
Second, while most LEDs produce a clear, bright light, this can sometimes be too harsh and cause discomfort to other drivers. It's important to have them correctly aimed and installed to avoid this problem.
Third, as LED headlights are more complex to install, you might need professional assistance, adding to the cost.
Before upgrading your headlights, it's important to check the legality in your location. As of the date of this post, LED replacement bulbs are not road-legal in the UK if they're installed in halogen units due to concerns about their beam patterns. However, cars that come with factory-installed LED headlights are perfectly legal.
If you decide to upgrade to LED headlights, why not consider enhancing other aspects of your vehicle's lighting? LED Fog Lights can improve visibility in poor weather conditions, and a LED Turn Signal Bulb can provide better on-road communication with
]]>As we delve into the world of automotive lighting, we can't help but notice the stark difference between LED and halogen headlights. Drawn from our experience, LED headlights are superior in more ways than one, leaving halogen bulbs in the dust. For instance, LED lights emit a brighter, more focused beam of light that not only enhances visibility but also adds a touch of modernity to your vehicle. Imagine driving down a poorly lit road with a flashlight, and then upgrading to a powerful spotlight – that's the difference between halogen and LED headlights.
Our team has also discovered that LED headlights are significantly more energy-efficient than their halogen counterparts. This means they consume less power from your vehicle, resulting in better fuel economy and a reduced carbon footprint. Think of it like swapping out your old, energy-guzzling refrigerator for a sleek, energy-efficient model – your wallet and the environment will thank you. So if you're unsure what you want in your perfect nighttime driving experience, consider making the switch to LED headlights – you'll be left wondering why you didn't make the change sooner.
When it comes to illuminating the road ahead, LED headlights have a clear advantage over their halogen counterparts. As indicated by our tests, LED headlights produce a brighter, more focused beam of light, allowing drivers to see farther and more clearly at night. This increased visibility not only contributes to a safer driving experience but also reduces eye strain during long nighttime drives. Additionally, LED lights boast a higher color temperature, which means they emit a whiter light that closely resembles natural daylight. This can significantly improve overall visibility and reduce the reaction time for drivers, making those nighttime excursions just that little bit more enjoyable.
On the other hand, halogen headlights may seem like the relics of a bygone era. However, they still have their merits. Halogen lights are generally more affordable and easier to replace compared to LED lights. But when it comes to light output, halogen bulbs fall short. Our team discovered that halogen headlights produce a less focused beam with a warmer, more yellowish hue, resulting in reduced visibility on the road. In essence, halogen headlights are like that old, comfortable sweater you can't seem to let go of – they get the job done, but you know deep down that there's something better out there. So, if you're looking to enhance your nighttime driving experience and aren't afraid to embrace the future, LED headlights might just be your perfect match.
When it comes to durability, LED headlights take the cake. As indicated by our tests, they can last up to 50,000 hours, which is significantly more than halogen headlights that usually last around 1,000 to 2,000 hours. Imagine having a home appliance lasting 25 times longer than its competitor - it's like comparing the lifespan of a pet turtle to a housefly! This extended lifespan means fewer replacements and ultimately, cost savings for the consumer.
Our team discovered that LED headlights are also more resistant to vibrations and shocks than halogen bulbs. Picture this: you're riding a bicycle down a bumpy road, and your LED headlight remains as steady as a gymnast on a balance beam while a halogen headlight wobbles like a tipsy tightrope walker. The robust design of LEDs ensures that they can withstand the rigors of daily use, making them a more reliable choice for drivers who demand longevity and performance from their headlights.
When comparing LED headlights to their halogen counterparts, one cannot overlook the aspect of design flexibility. As indicated by our research, LED lights offer a significant advantage when it comes to creative and innovative designs. Their compact nature and ability to be arranged in various shapes and patterns give automotive designers more freedom to experiment and create sleek, visually appealing headlight systems. In contrast, halogen headlights are restricted by their larger size and traditional bulb structure, limiting the possibilities for groundbreaking designs. After conducting experiments with both types of lights, our team discovered that LED headlights allow for a more modern and stylish appearance, which can elevate the overall look and feel of your vehicle.
Furthermore, the greater design flexibility of LED headlights also translates into better performance and functionality. Our consultants found that LED lights can be adapted to various beam patterns, allowing for optimal light distribution on the road. This not only enhances visibility for the driver but also reduces glare for oncoming traffic, ensuring a safer driving experience. On the other hand, halogen headlights often struggle to provide the same level of adaptability and precision in light distribution. So, when you're trying to decide between LED and halogen headlights, take a moment to consider the advantages that LED lights offer in terms of design flexibility, which can make a significant difference in both aesthetics and performance.
When it comes to the environmental impact of LED headlights and halogen headlights, there's a clear winner. LED headlights are not only energy-efficient but also last significantly longer than their halogen counterparts. According to our research, LED headlights use about 75% less energy than halogen lights. This means that when you're driving around town with LED headlights, you're consuming less power, which in turn translates to fewer greenhouse gas emissions. Think of it like choosing reusable grocery bags over single-use plastic ones; it's a small change that can make a big difference in the long run. Additionally, with a longer lifespan, LED headlights reduce waste by requiring fewer replacements, and thus, fewer discarded bulbs cluttering up landfills.
In contrast, halogen headlights may not be the eco-friendliest option on the market. While they may provide a more budget-friendly initial purchase, their shorter lifespan and higher energy consumption can contribute to increased pollution and waste. It's similar to opting for disposable plastic water bottles instead of investing in a reusable one; sure, it might be cheaper upfront, but the long-term environmental consequences can't be ignored. Our team discovered that making the switch to LED headlights is not only a wise choice for your wallet but also a responsible decision for the planet. So, if you're keen on reducing your carbon footprint, LED headlights should be on the top of your list for automotive upgrades.
While LED headlights are gaining popularity, it would be unfair to dismiss the merits of halogen headlights. After putting them to the test, we found that these traditional bulbs still have a few advantages up their sleeves. For instance, their affordability and ease of replacement make them a solid option for drivers on a budget or those who prefer a more hands-on approach to vehicle maintenance.
As indicated by our research, halogen headlights tend to have a lower upfront cost than their LED counterparts. This is especially appealing for those who may not be ready to invest in the more expensive LED technology. Additionally, the fact that halogen bulbs have been around for much longer means that they are more widely available, making it easier to find replacements at your local auto parts store.
Our team also discovered that halogen headlights are generally easier to replace and maintain compared to LED lights. This is because they often require less specialized knowledge and tools to install, making them a more accessible option for do-it-yourself enthusiasts. In contrast, LED headlights may involve more complex components and require professional assistance for installation or maintenance, which could lead to higher costs over time.
It's important to note that halogen headlights may not be as energy-efficient or long-lasting as LED lights. However, for those who prioritize affordability and ease of maintenance, halogen bulbs are still a viable choice. Based on our firsthand experience, it's essential to weigh the pros and cons of both options and determine which best suits your needs and preferences. So, whether you're sure what you want or still trying to find your perfect headlights, it's worth considering both LED and halogen options before making a final decision.
In conclusion, the battle between LED and halogen headlights has been a heated one, with LED technology ultimately shining brighter. The benefits of LED headlights, such as improved energy efficiency, longer lifespan, and better visibility, have made them the top choice for many drivers. So, if you're still on the fence and not sure what you want, we invite you to find your perfect headlight upgrade at carifex.com. Browse through our extensive collection of LED headlights, fog lights, and accessories, and let Carifex lead the way to a brighter and safer driving experience.
"]]>Possessing protective gear for vehicle lifts, wrenches and screwdrivers, engine hoists, brake lathes, and other essential accessories will give you peace of mind when tackling an automobile job. Also, having the necessary auto repair accessories will give you the confidence required to get the job done right.
Investing in car repair accessories is essential for any mechanic. Within this post, we'll explain why it's important to have these necessary car repair accessories in your garage and what they are.
If you're a car enthusiast or someone who loves to repair vehicles in their garage, you know that having the right tools and accessories is key to successful car repair. Here are the essential accessories for any car repair job in the garage, from basic hand tools to sophisticated diagnostic equipment:
The most common pieces of protective gear include safety goggles, ear plugs, and masks to protect eyes, ears, and lungs from hazardous particles and fumes. Safety boots also provide an extra layer of protection against slipping or tripping on spills or other hazardous materials found in the garage environment.
A wrench allows mechanics to loosen and tighten bolts of various sizes securely, while a screwdriver can easily remove or replace screws with precision. A wide selection of wrenches and screwdrivers ensures that mechanics have the right tool depending on the job.
A vehicle lift helps mechanics raise vehicles off the ground to access components underneath or beneath them more easily. Vehicle lifts come in different sizes and weights, so regardless of what type of vehicle you need to work on, there will always be a suitable one for your needs.
Mechanics can collect used engine oils without spilling them with an oil drain pan and oil caddy. A good oil drain pan should be big enough for all vehicles, so pick one that fits your needs. An oil caddy keeps new engine oils safe from contamination during servicing, so they don't get contaminated.
It is always useful to have a battery charger or jumper available when dealing with dead batteries in cars or trucks. These can help quickly bring the batteries back to life without replacing them entirely.
A reliable battery charger should always accompany any mechanic’s toolbox, while jumpers are incredibly useful if you are stuck somewhere due to a dead battery issue.
It helps lift large components safely off their mounts so that vehicles can be thoroughly repaired, such as engine overhauls or transmission replacements, with an engine hoist. As engine hoists have adjustable height settings, they can be used on cars of varying sizes, making them quite versatile among garages.
Mechanics creepers are low chairs that let auto mechanics easily get under vehicles where parts may not be accessible by kneeling next to your ride. This is perfect for when getting up close with your project is necessary. Most creepers come with wheels, so moving around in tight spaces is easy.
It allows technicians to accurately and quickly remove a thin layer of metal from the surface of brake rotors, making them perfectly smooth again and helping them function correctly. The key benefit here is it ensures that brakes are appropriately calibrated to provide reliable stopping power when needed.
These compressors compress coil springs while removed or installed so technicians can easily access the strut mount or other components on the suspension system. This helps ensure that all necessary repairs can be completed safely and without damaging the vehicle’s components.
Jack stands are an invaluable tool for any car repair garage, allowing technicians to safely lift a car off the ground to access its underside for inspections or repairs. They also provide stability, preventing cars from toppling over during servicing operations.
Jacks offer even more versatility by allowing technicians to raise a vehicle at specific points for specific types of work, such as wheel alignment or tire changes. Among these, the bottle jack and floor jack are most commonly used, as they are compact, affordable, and easy to use.
A press is a highly versatile tool in any automotive garage because it can pressurize objects to complete specific tasks with precision and efficiency. For example, it can fix brakes by compressing pistons back into cylinders, removing bearings from shafts, and pressing bushings into place.
Workbenches provide a stable platform for vehicle repairs in the garage setting. They allow technicians to have their tools readily available and organized while they work, ensuring that each task runs smoothly without the equipment being misplaced during servicing operations.
When doing automotive repairs, it is essential to have a car conditioner and cleaner. This will help keep the car looking good on the outside and the inside while you work on it.
Specialized cleaning solutions can help remove grease, grime, dirt, and dust from engine compartments before performing maintenance such as oil changes or spark plug replacements.
When working on automobiles in the shop, having extra parts on hand can be helpful. This way, you will have access to parts that might not be available immediately from retail stores or online retailers if something needs replacing immediately during a repair operation.
Having the right accessories for car repair in a well-organized and properly equipped garage is essential for any car enthusiast who wants to take on their own maintenance and repairs.
Some are protective equipment, screwdrivers and wrenches, engine hoists, brake lathes, presswork benches, car conditioners, cleaners, spare parts service kits, oil drain caddies, and battery chargers can go a long way when maintaining or repairing cars.
By keeping these items organized and accessible in one place in your garage, you can save both time and money when taking on small tasks or larger projects. You’ll get every car repair job done safely and efficiently with the right tools.
]]>The best LED headlights offer numerous benefits compared to traditional halogen headlights. For starters, LED headlights are much more energy efficient and can last up to five times longer than halogen headlights. This means that you will save money on replacement bulbs and won't have to worry about constantly replacing them.
LED headlights also produce a much brighter and more focused beam of light, which can improve your visibility on the road. This is especially important when driving at night or in foggy conditions. Additionally, because LED headlights produce a whiter light than halogen headlights, they can help to reduce eye strain and improve overall visibility.
Another benefit of LED headlights is that they are much more durable than halogen headlights. They are able to withstand rough driving conditions and are less likely to break or fail. This makes them a great choice for off-road or heavy-duty vehicles.
In terms of style, LED headlights also have an edge over halogen headlights. They are available in a wide range of colors and styles, so you can customize your vehicle to suit your personal taste. Additionally, because LED headlights are more compact and sleek, they can help to improve the overall appearance of your vehicle.
Overall, there are many compelling reasons to choose LED headlights for your vehicle. They are more energy efficient, longer lasting, brighter, and more durable than halogen headlights. So if you want to improve your visibility and style on the road, consider upgrading to LED headlights.
LED headlights have become increasingly popular in recent years due to their numerous benefits over traditional halogen headlights. LED headlights are brighter, more energy efficient, and have a longer lifespan than halogen headlights. They are also more durable, as they are not prone to cracking or shattering like halogen bulbs. In this article, we will be discussing the benefits of LED headlights and highlighting some of the best LED headlights currently available on the market.
Benefits of LED Headlights:
One of the biggest benefits of LED headlights is their brightness. LED lights are much brighter than halogen bulbs, which means that they can provide better visibility on the road at night. This can help to improve driver safety, as it allows drivers to see potential hazards on the road more clearly.
Another benefit of LED headlights is their energy efficiency. LED lights consume less power than halogen bulbs, which means that they can help to reduce the strain on your vehicle's electrical system. This can help to improve fuel efficiency and save you money on fuel costs over time.
LED headlights also have a longer lifespan than halogen bulbs. On average, LED headlights last around 50,000 hours, while halogen bulbs typically last around 1,000 hours. This means that you will not have to replace your headlights as often, which can save you money on replacement costs over the long term.
In addition to their brightness, energy efficiency, and long lifespan, LED headlights are also more durable than halogen bulbs. Halogen bulbs are prone to cracking and shattering, which can be a safety hazard. LED lights, on the other hand, are solid state devices, which means that they are much more durable and less likely to break.
Best LED Headlights:
There are many different brands and models of LED headlights available on the market, so it can be difficult to know which ones are the best.
Here are the benefits of Carifex LED Headlights
Now, this isn’t something that most people take into account. As such, you may not be certain how to go about it.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
If you have an older car, there is a good chance that it has halogen headlights. The issue with these lights is that they aren't the brightest options around. Furthermore, since they aren't energy efficient, the bulbs can burn out quite quickly.
To overcome this issue, consider switching to LED headlights. These are brighter and can illuminate a larger stretch of the road, allowing you to see more clearly. What's more, these headlights use energy more efficiently, ensuring that they last longer.
Of course, it doesn’t matter if you have the brightest headlights if the cover is dirty. So, make it a point to keep your headlights clean and grime-free. There are special headlight cleaning kits that should help you get any kind of dirt or obstruction off the plastic.
Since you’re in the car when you turn on your headlights, you won’t know if they’re improperly aligned. They could be aiming too low or one light may be higher than the other. So, make it a point to check that they are aimed properly in advance.
If they are misaligned, you can fix them yourself. Simply consult your owner’s manual to learn how to change the alignment. However, ensure that they aren't aimed too high, either. After all, you don’t want to blind drivers headed in the opposite direction.
Have you ever noticed that your windshield appears dirtier at night? This is because the streetlights pick up the streaks on the glass, making them more visible. In turn, these can cause a glare that makes it difficult to see through.
To avoid this scenario, make sure to clean your windshield regularly. More specifically, use newspaper to wipe away the streaks as this is more efficient. It isn’t just the windshield that you need to scrutinize. Pay close attention to all the windows in your car as well. To prevent them from getting streaky in the first place, avoid touching the car with your bare hands.
Keep in mind that exterior mirrors need to be cleaned as well. Otherwise, dirty mirrors will reflect other drivers’ headlights in a more diffused pattern. This will cause a glare that can distract you.
At the same time, appropriately adjust your exterior mirrors. Tilt them down just a little bit. The goal here is to be able to see the cars behind you without worrying that their headlights hit you straight on.
Your dashboard is equipped with dimmer lights for the instrument panel in front of you. However, there is a good chance that you have never used them. Well, it is time to change this.
Understand, these lights can be rather distracting, especially since your surroundings are dark. And, as has been established, it is important to keep your focus while driving at night. Thus, use the dimmers to lessen the brightness of the controls while keeping them visible.
If you tend to drive in remote areas, you may need a little more light on the road. Thus, fog lights may come in handy. The benefit of these lights is that they are aimed low since fog tends to hover just above the road. Furthermore, they cast beams that are a little wider, illuminating the road ahead.
Just make sure that the fog lights are placed at the proper level so that you don’t blind oncoming traffic. Also, be aware that they make potholes, small rocks, and bumps appear larger than they are.
These are the top ways to prepare your vehicle for nighttime driving. They are not difficult to accomplish. By adhering to them, you can guarantee that you stay safe while driving at night.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
Image source: https://unsplash.com/photos/I7yG5uF9-bw]]>
Now, this isn’t something that most people take into account. As such, you may not be certain how to go about it. Well, you will find all the guidelines for this below:
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
If you have an older car, there is a good chance that it has halogen headlights. The issue with these lights is that they aren't the brightest options around. Furthermore, since they aren't energy efficient, the bulbs can burn out quite quickly.
To overcome this issue, consider switching to LED headlights. These are brighter and can illuminate a larger stretch of the road, allowing you to see more clearly. What's more, these headlights use energy more efficiently, ensuring that they last longer.
Of course, it doesn’t matter if you have the brightest headlights if the cover is dirty. So, make it a point to keep your headlights clean and grime-free. There are special headlight cleaning kits that should help you get any kind of dirt or obstruction off the plastic.
Since you’re in the car when you turn on your headlights, you won’t know if they’re improperly aligned. They could be aiming too low or one light may be higher than the other. So, make it a point to check that they are aimed properly in advance.
If they are misaligned, you can fix them yourself. Simply consult your owner’s manual to learn how to change the alignment. However, ensure that they aren't aimed too high, either. After all, you don’t want to blind drivers headed in the opposite direction.
Have you ever noticed that your windshield appears dirtier at night? This is because the streetlights pick up the streaks on the glass, making them more visible. In turn, these can cause a glare that makes it difficult to see through.
To avoid this scenario, make sure to clean your windshield regularly. More specifically, use newspaper to wipe away the streaks as this is more efficient. It isn’t just the windshield that you need to scrutinize. Pay close attention to all the windows in your car as well. To prevent them from getting streaky in the first place, avoid touching the car with your bare hands.
Keep in mind that exterior mirrors need to be cleaned as well. Otherwise, dirty mirrors will reflect other drivers’ headlights in a more diffused pattern. This will cause a glare that can distract you.
At the same time, appropriately adjust your exterior mirrors. Tilt them down just a little bit. The goal here is to be able to see the cars behind you without worrying that their headlights hit you straight on.
Your dashboard is equipped with dimmer lights for the instrument panel in front of you. However, there is a good chance that you have never used them. Well, it is time to change this.
Understand, these lights can be rather distracting, especially since your surroundings are dark. And, as has been established, it is important to keep your focus while driving at night. Thus, use the dimmers to lessen the brightness of the controls while keeping them visible.
If you tend to drive in remote areas, you may need a little more light on the road. Thus, fog lights may come in handy. The benefit of these lights is that they are aimed low since fog tends to hover just above the road. Furthermore, they cast beams that are a little wider, illuminating the road ahead.
Just make sure that the fog lights are placed at the proper level so that you don’t blind oncoming traffic. Also be aware that they make potholes, small rocks, and bumps appear larger than they are.
These are the top ways to prepare your vehicle for nighttime driving. They are not difficult to accomplish. By adhering to them, you can guarantee that you stay safe while driving at night.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
Image source: https://unsplash.com/photos/zKILixwL90A]]>
Now, one of the reasons that people are so fond of halogen headlights is the cost and ease of replacement. You can find a set of these at any auto store and replacing these lights will just take a few moments. Nevertheless, if you still have halogen headlights on your car, it’s time to think about switching to LED headlights.
In case you aren't convinced, here are some arguments to consider:
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
The reason headlights are so important is that they ensure your safety while driving at night. So, naturally, you should opt for headlights that ensure maximum safety. This is where LED headlights come in.
For one, LED headlights are one of the brightest and whitest options available out there. This means that they are far better equipped to illuminate the road ahead while picking up what you need to see. Furthermore, LED headlights can illuminate a wider and longer path ahead of your vehicle.
In doing so, the headlights can alert you in advance to any objects or vehicles in front of you. Thus, it will be easier to react to any obstacles, reducing the risks of accidents.
Last, but not least, LED headlights have greater reflective features. This means that they reflect the light from road signs, so you know where they are. Needless to say, this will help you observe road rules more readily.
Did you know that on average, LED headlights are supposed to last up to 30,000 hours? This means that they beat all the other competition outright. Halogen bulbs typically last only a thousand or so hours. Xenon – its closes competitor – is meant to last 20,000 hours.
Needless to say, one of the main benefits of LED headlights is that they last longer than traditional headlights. As a result, you won’t need to swap them out quite as often. This can cut down on how much maintenance you need to do.
This also helps to offset the overall cost of LED headlights. While they may cost more than halogen headlights, they don’t need to be changed as often. Thus, in the long run, you will end up breaking even or possibly saving money!
LED technology has an important feature – these headlights can utilize energy more efficiently. This means that they only consume as much energy as is required to power the lights. In turn, this energy isn’t unnecessarily wasted on heat energy.
It is this feature that makes LED headlights so suitable for older cars. Since the lights don’t require as much power, they aren't such a drain on the power supply. This allows older cars to redirect power to more important parts of the vehicle.
More significantly, LED headlights are more eco-friendly than halogen lights. Thus, they are better for the environment which is something that drivers today are particularly concerned with. Even if this does not interest you, LED headlights can help to reduce fuel consumption. In doing so, you can save money in the long run.
Sure, the aesthetic appeal may not be the most important element of a vehicle. Nevertheless, most people like to have a sleek and good-looking car. Well, LED headlights can help in this respect as well. This is due to their smaller size.
Since the lights are smaller, they can be formed into virtually any shape. This includes a sleeker headlamp shape. Not to mention, the lights don’t protrude as much. Thus, you will be able to enjoy a better-looking car.
This is also why luxury cars tend to opt for LED headlights. With these features, they can produce more sophisticated looking cars. You, however, can enjoy this feature without having to splurge on a more expensive vehicle.
As mentioned, there is a difference between halogen and LED headlights. Due to this, most car owners assume that transitioning from halogen to LED headlights is a tricky process. However, this isn’t the case at all.
Newer LED headlight sets have a plug and play function. As the name suggests, these are LED headlights with bulb bases that fit into the same socket as halogen bulbs. Thus, you won’t need to make any changes to the connection. Instead, it is as easy as plugging the LED headlights in and having them work immediately.
If you own a luxury car, you may be wondering how the LED headlights will function with a CanBUS system. Well, once again, there is no need for concern. Specific kits are equipped with capacitors that ensure the system and the LED headlights are compatible.
LED headlights are the futures of cars. So, even if car manufacturers are actively outfitting vehicles with them, you should certainly consider switching out your halogen headlights for these innovative lights.
Although the initial cost of the LED headlights may seem off-putting, keep in mind that they will more than makeup for it in value. As you won’t need to change these headlights nearly as often, you don’t have to spend additional funds on new lights. This way, you will find that LED headlights are the superior choice in many respects.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
Image source:https://unsplash.com/photos/x0T8dHN_Rr4]]>
Nevertheless, you can’t simply pick out the first set of lights you find. There are numerous LED headlights to choose from, after all. Thus, you need to select the right one for your vehicle. In case you need some assistance, follow these guidelines:
The first thing to check when buying new LED headlights is compatibility. If the headlights aren't compatible with your car’s make and model, it may not fit or function properly. Fortunately, it is easy enough to check the precise type of LED headlights you will need.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
The simplest route is to check your owner’s manual. This will tell you exactly what type you need to buy. You can find this information under the Maintenance and Replacement Bulbs section. There will be recommendations for both high and low beam bulbs – make sure to read through these thoroughly.
If you have a second-hand car or you’ve lost your owner’s manual, there's no need to worry. You will just have to remove the current headlights and take a look at the stickers on the back of the lights. This will help you find the details you’re looking for.
If you have the latest model of a certain vehicle or are driving a luxury car, there is a good chance that you’ll have to contend with the CanBUS. In short, it’s a computer system that allows microcontrollers and devices to communicate with each other.
In case your car is equipped with such a system, you won’t be able to attach the headlights as you would typically. You will require a relay and an ECM capacitor to hook the headlights to your car. Thus, the first step is to check whether your vehicle is equipped with such a system. If it is, buy LED headlights that specifically contain the necessary capacitor.
It is a good idea to hire a mechanic to handle the job. This way, you can reduce the risk of making any changes that may void your warranty. Not to mention, you can ensure that the headlights are installed in the right way.
One of the benefits of LED headlights is that you can install them yourself. This, of course, is provided that you get the right kind. Whenever you consider buying a particular product, always read the installation process step by step.
It is important to get LED headlights that have a “plug and play” function. These headlights have bulb bases designed with features that fit into the same socket and mate with wiring connectors such as halogen bulbs. This makes the replacement process much simpler and quicker.
For the most part, LED headlights should be legal. However, be aware that the laws regarding these lights do vary from region to region. Due to this, it is always a good idea to check what the local regulations are.
As a rule of thumb, examine the brightness of the bulbs before selecting them. They should be bright enough so that they illuminate a path around 50m to 100m ahead of you. At the same time, they shouldn’t be overwhelming. So, make sure they aren't bright enough to blind or distract drivers headed in the opposite direction from you.
These are some important points to keep in mind before checking your LED headlights. So, if you’re considering making a switch, pay close attention to the guidelines mentioned here. This way, you can ensure that you get the best possible performance out of your new LED headlights.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
Image source: https://www.pexels.com/photo/close-up-photography-of-white-chevrolet-camaro-1213294/
]]>For one thing, there are numerous aspects to consider. For another, you probably lead a busy lifestyle and may find it difficult to attend to its upkeep. This is why you need a car maintenance checklist. It will help you stay on top of all the tasks that need to be completed. Here are some guidelines you should follow to create one:
Your owner’s manual is crucial. This is because it contains all maintenance details specific to your make and model. So if you read this thoroughly, you can take a lot of the guesswork out of your maintenance service.
Each car is different. This can be true for differing models within the same brand. As such, an owner’s manual is the only document that will instruct you on how best to take care of your vehicle. This can prevent numerous mistakes on your part.
Most interestingly, your owner’s manual can help to save money on maintenance. Contrary to popular belief, your car may not need to be serviced as often as you think. This is especially true for newer makes and models. They often come equipped with the latest tech, gear, and components. Therefore, you could stretch out the maintenance work if you pay attention to suggestions given in the manual.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets or CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
Your owner’s manual is a treasure trove of information. At the same time, you have to appreciate that your car maintenance schedule may be based on several different factors. This includes how often and the conditions in which you drive your vehicle. Depending on these factors, your car may need to be maintained more or less frequently.
However, the only way to be certain of this is to check the various parts of your vehicle system. This includes the oil and fluid levels, air filters, tires, and a whole lot more. Your first order of business should be to set up reminders to check your car. Then, based on this, you can decide to either follow the owner’s manual instructions or come up with your own timeline.
As you may be aware, older cars need more maintenance. Thus, you may need to have them serviced more often. At the very least, older cars could require more frequent oil changes or have to have various fluids topped up. The only way to know for sure is to keep a close eye on these levels before you drive.
If you find that they dip more quickly, make a note of this. You will be able to create a schedule that is better suited to your older vehicle. By making this effort, you can avoid doing serious damage to your vehicle.
You don’t need to take your vehicle into the shop every time something needs to be changed. There are several maintenance tasks you can handle by yourself. You can manage this even if you’re not well-versed with cars.
So, go through the list of maintenance tasks mentioned in your owner’s manual and make a list of what you can tackle. There are plenty of online guides and tutorials that can help if you aren't confident in undertaking these tasks. Once you have outlined what you can manage, set reminders for yourself.
As cars become more technologically advanced, the number of DIY maintenance tasks owners can do have begun to dwindle as well. Thus, you will most likely have to take your vehicle in for servicing at some point or another. Nevertheless, timing is key here.
Your owner’s manual will pinpoint exactly when you need to take your car in for service. Now, if it’s a time-based task, it is easy enough to set a reminder. However, if it’s based on factors such as driving distance, make a note to keep your eye on the meter.
The one thing that your owner’s manual may not remind you about is seasonal maintenance. You should stay on top of this yourself. Firstly, be mindful of where you live. After all, in some regions, certain seasonal changes may be so mild that you don’t need to do any maintenance at all.
On the other hand, you might live in an area that experiences extreme temperature and weather fluctuations. Just before it gets cold or very hot, check components such as heating, air conditioning, coolant levels, tires, and more.
To create future maintenance checklists, you need to have the details about your last service on hand. This is where a personal logbook comes in. Make sure to note down every maintenance job you did, regardless of whether you handled it or took your car into service.
For more complex maintenance tasks, affix a receipt next to the entry. This way, if something should go wrong, you will be able to get the repairs completed for free. At the very least, when selling your car, you have proof to back up how well you took care of your vehicle. As a result, you may be able to get a better price.
So there you have it – your guide to making a maintenance checklist. All that’s left is to create that checklist to keep your vehicle in top condition.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets or CARIFEX® Non-Flickering LED Headlight Sets and also our all-new CARIFEX® LED Turn Signals to Elevate Your Driving Experience, Today!
Image credit: https://unsplash.com/photos/1R63taCoSnM]]>
Well, the good news is that your troubles are over. Below, you can find a list of dos and don’ts for vehicle maintenance.
Every car is equipped with a car owner’s manual. In fact, even when you buy a second-hand vehicle, you should still be able to find the manual in the glove compartment. Despite this, it is estimated that around 40 percent of vehicle owners never actually get around to reading this!
It is vital that you don’t fall into this group. Your owner’s manual contains everything you need to know about your specific make and model. Keep in mind, every vehicle is different and needs to be maintained in a certain way. If you want to make sure that you’re maintaining your vehicle in the safest and most appropriate way, then this booklet will help you out.
This document also gives you some idea of how often you need to service your car. Thus, it can actually help you save some money as well. For instance, after reading the manual, you may discover that you don’t need to change your oil as often as you might have imagined.
There is no denying that auto service can get rather pricey. Thus, it is natural to want to find the cheapest mechanic around. However, remember that you often get what you pay for. So, although you may be saving money in the long run, your vehicle servicing may not be up to scratch. In this way, you may be putting your vehicle at risk for further issues later on.
To avoid such a scenario, make sure to do your research. Do some checking and find a good auto repair shop that is affordable, but that has a reputation for excellent service. You will then be able to enjoy the best of both worlds.
Oh, and when selecting an auto repair shop, make it a point to check on the kind of spare parts that they use. All the parts should be sourced from well-known, good quality manufacturers. This ensures that your vehicle’s repair job will last a lot longer.
As you are well aware, there are now more signs than ever before on your dashboard. These light up when there is something wrong with your vehicle. Although it can be tempting to ignore these for a while, you shouldn’t. If you can’t figure out what the problem is, take it into a repair shop as soon as possible.
Of course, these aren’t the only warning signs that your vehicle will give. Sometimes, you may notice that something is amiss while you are driving. You may find it difficult to steer your car, brake, or perform similar functions as easily. Or, it could be that you’re hearing certain noises from the internal components.
Whenever you make such observations, don’t ignore them. Have your mechanic take a look at your car immediately to determine what is wrong. Remember, continuing to drive your vehicle in such a state will only make the problem worse. Not to mention, it could compromise your safety as well.
Did you know that in just the last few years alone there have been millions of vehicle recalls? What’s even more shocking is that many of these were from some of the best-selling car manufacturers in the world. Clearly, based on this information, it is possible to buy or own a vehicle that may be faulty in some way.
Now, the car manufacturer or dealer should contact you directly. However, if your vehicle has changed hands a few times, this may not apply to you. This is why it is a good idea to keep checking for yourself. This is easy enough to do. You simply have to visit the National Highway Traffic Safety Administration's recall page and enter your VIN number. This will show if your vehicle has been recalled or not.
Yes, tires can be rather expensive to replace. And, to make matters worse, you will have to buy four new ones! Just doing the math on this can make you want to put off buying new tires until much later. Before you come to this decision, though, it is a good idea to check your tires.
In particular, check out the tread and just how much it has been worn down. The tread is what helps your tires – and therefore, your car – to maintain contact with the road. If the rubber has been worn away quite a bit, then there is a loss of friction. This increases the risk of your tires sliding on the road.
It should also be noted that certain types of damage aren’t always noticeable on your tires. The rubber on very old tires may have tiny cracks or tears. Thus, their rigidity is compromised quite a bit, making it quite dangerous to drive on them. So, do yourself a favor and swap out your tires well before they reach the end of their lifespan.
These are the top dos and don’ts that you should be aware of as a car owner. Follow them and your car maintenance will be an absolute breeze. You will be surprised by just how much longer you are able to make your vehicle last.
Source: https://unsplash.com/photos/0L2Y19nsYmY
]]>Many experts believe that maintaining your car on a regular basis could actually double its lifespan! Thus, not only will your vehicle run for longer, but it will perform a lot more smoothly as well. Let’s take a look at why maintenance is so important and how it can help your car last longer.
The last thing you want to experience is engine failure – especially while driving. Making sure that your engine is in excellent condition is vital for a number of reasons. Most importantly, it ensures that you are safe on the road. At the same time, it helps keep your engine working well for longer.
Whenever you go in for your regularly scheduled car maintenance, the mechanic will check and replenish your engine oil levels. They will also examine the coolant levels and swap out the air filters if necessary. All these steps aid in keeping your engine in the best condition possible and in good working order.
There are fewer things more frustrating than your car breaking down suddenly. Even minor problems can reduce performance or even compromise your safety while driving. Now, just imagine if you could prevent such issues – at least to a certain extent.
Well, this is exactly what routine maintenance helps you to do. When you take your car into the shop as needed, you are ensuring that every part of your vehicle is given the opportunity to function as smoothly and efficiently as possible.
In the same vein, you are also removing or tending to any flaws that may cause problems later on. So, when you combine all these things, you are actually taking preventative measures for your vehicle. Naturally, this reduces the risk of issues cropping up at a later date.
Of course, you may not be able to prevent all car problems. There are a few that can sneak up on you. The good news, though, is that you stop these issues from worsening or affecting other parts of the car. As you can imagine, regular maintenance is how you can manage this.
Understand, when you go in for routine maintenance, your mechanic will give your car a once-over, inside and out. At this point, they will be able to determine if there are any budding problems that need fixing. Then, the mechanic can sort out these issues immediately.
Another benefit is that attending to problems as they arise means that the remedy is often simpler as well. This also means that your mechanic will not charge you as much!
It is clear that routine maintenance is the way to go if you want your vehicle to last long. However, one thing many car owners struggle with is knowing when to take their car in. Well, your car manual can help you out here. It will tell you exactly when your vehicle needs to be taken to the mechanic. So, make sure to follow these instructions and enjoy driving your car for longer.
Source: https://www.pexels.com/photo/asphalt-auto-automobile-car-209644/
]]>Do they keep mentioning that various parts need to be replaced due to extensive wear and tear? Well, there is both bad and good news for you.
The bad news is that your driving and maintenance mistakes might be causing this wear and tear. The good news, however, is that you can remedy this situation rather easily. So, to make sure you don’t repeat the same errors, here are the top mistakes you need to avoid:
Do you take your car even to travel short distances? While this may make your life more efficient, it certainly isn’t doing your car any favors. Understand, cars work best when the engine – and the oil – is nice and warmed up. When the engine oil is at a higher temperature, it is able to evaporate combustion byproducts. This keeps the oil cleaner for longer and allows it to lubricate all the parts well.
However, the engine does require some time to warm up. So, if you are only heading out on short trips, there is a good chance that the oil isn’t reaching the necessary temperature. As a result, the engine oil can get gummed up and lose some of its capabilities.
In case you aren’t able to give up short trips, you should do something else instead. Get more oil changes – around twice a year. This way, you can swap out the worn-out engine oil and ensure that no damage is done to the other parts.
You may have the Stop/Start feature enabled on your car. Or, this may be a practice that you follow to improve its fuel efficiency. Well, you may want to limit how much you do this. This kind of stop and start action can have a negative impact on the internal components.
The two components you have to be mindful of in this process is the crankshaft and the bearing. When the engine is working, these two components are separated by a thin film of oil. As such, they don’t come into contact with one another.
When the engine stops, though, the crank gently settles onto the bearing. Once the engine starts up again, there is a brief period where the crankshaft begins to spin again, but the oil hasn’t separated the two surfaces. This is where the wear and tear happens. The more you engage in the start and stop driving, the more these parts get worn down. So, keep it to a minimum.
Now and again, you will need to slam on your brakes to prevent your car from colliding with another vehicle. Nevertheless, avoid relying on this action too much. The more pressure you apply on your brakes, the more quickly your brake pads wear off. Thus, you will have to replace them on a more regular basis.
One way to prevent this is to monitor your speed. If you don’t go too fast, there will be no need to hit the brakes quite so hard. You should also get into the habit of monitoring all the cars around you. If you need to slow down, press on the brakes more lightly so that you come to a more gradual stop.
There is no denying that driving downhill – especially down a steep slope or mountain – can be nerve-wracking. Thus, it is only natural that you would want to drive as carefully and as slowly as possible. Unfortunately, for many drivers, this means dragging your brakes all the way down.
The issue with doing this is that you can actually wear out your brakes. Rather than relying solely on your brakes, use your engine to slow the vehicle down. Before heading down a slope, shift into second gear. If you need to downshift, make sure that you reduce your speed first. This will prevent you from damaging the transmission.
Maintain a safe speed and don’t attempt to go too fast while heading down the slope. To reduce your speed, gently press on the brakes. Release the brakes once you have achieved the proper speed. Repeat this step until you get to the bottom of the slope. Avoid pressing on the brakes for too long if you can help it.
There are moments when you might see a pothole or a speed bump just a little too late and hit it going at full speed. Now, as the driver, you will definitely feel the impact. However, if you think there isn’t any damage to your car, think again.
There are a number of parts that can be worn down and outright damaged when you hit potholes and speed bumps at a high speed. This includes your tires, wheels, and suspension. There is a good chance that your vehicle will need to be aligned as well.
As mentioned, you can’t always skirt over a pothole. However, if you know that you’re driving on a bad road, make it a point to watch out for any dents in the road. This way, you can slow down before you hit them and reduce the risk of damage.
You should follow the same advice for speed bumps. Always slow down as much as possible when approaching one. The slower you drive, the less impact your car will have to absorb. Not to mention, you will be a lot more comfortable too.
These are the top driving mistakes you need to avoid at all costs. Of course, now that you are aware of them, it will be much simpler for you to take the necessary precautions to sidestep them.
Source: https://unsplash.com/photos/0iLl1Qgxz64
]]>Of course, this may sound absurd, especially if you’re careful about how you use your vehicle. To understand how you may impact your car’s longevity, let’s first take a look at an important factor: car maintenance.
It is a well-known fact that car maintenance is of the utmost importance if you want your car to last longer. Following car manual guidelines or getting preemptive “check-ups” can help to prevent a myriad of problems. Not to mention, it can also work to catch blossoming problems.
Unfortunately, in recent years, it appears that around 35 percent of vehicle owners have been skipping out on maintenance. This, naturally, has led to an increase in the number of breakdowns and severe vehicle-related problems. As a result, these vehicles don’t last all that long.
So, why are car owners skimping on car maintenance when they know it’s so important? Well, there are a couple of reasons:
It is common knowledge that vehicles are now more complex than they have ever been. This, of course, is because many of the systems have gone digital. There is now an increasing number of computers handling various systems within modern cars.
As a result, the average person has a tough time maintaining their car. A few decades ago, you could figure out most issues with the help of your toolbox. These days, it isn’t quite as simple. Not to mention, in many modern models, you can’t even access parts that would typically be easy to get to.
All of this means that most people have to take their car into the shop even for the smallest repairs. This means they have to make more of an effort to have their cars maintained. Furthermore, maintenance can also cost more…
Considering all the changes that have come about, mechanics now need to be more skilled and experienced than ever before. Naturally, this means that they are charging more for their services. At the same time, many mechanics often have to undertake complex and time-consuming routes to handle most basic car maintenance. Thus, they are forced to issue higher bills.
It is no surprise that many modern cars are more environmentally friendly than their predecessors. While this is certainly a good thing, it also comes at a cost. These improved systems require more superior resources which are often a great deal more expensive.
That’s not all – even the material used to make car bodies is more technologically advanced. This means that mechanics can’t rely on an acetylene torch and a few tools anymore. Instead, they require more laborious processes to fix up dents and other issues that may exist on the surface.
Of course, there are still some car maintenance tasks you can take care of yourself. Unfortunately, it appears that younger car owners don’t really know how to tend to these tasks either. For instance, it was found that a significant number of Millennials don’t know how to change a tire or even open up a car bonnet!
This means that once again, most individuals find themselves having to drive to the nearest service station or auto shop. Considering how much these services cost, many people are reluctant to do this in the first place.
So, where does this leave you as a vehicle owner? Does this mean you are doomed to repeat this mistake and end up with a busted-up car? Well, not necessarily.
One of the first things you could do is teach yourself how to handle DIY car maintenance. This way, you can stay on top of these with very little added cost. Not to mention, these tasks will be far quicker to complete as well.
To handle other car maintenance tasks, it is important to find an affordable car mechanic that you can trust. Sure, this may take some time and research. However, you can guarantee that it will be well worth the effort. Once you have found the best mechanic for you, it is important to actually handle your car maintenance as required.
Keep in mind that while car maintenance can be pricey, it is often much cheaper than repairs resulting from negligence. So, in the long run, you will end up saving money simply because you stay up-to-date with your maintenance.
Source: https://unsplash.com/photos/C7V2Ue3n1uM
]]>Your vehicle manual provides a treasure trove of information about your car. In particular, it will give you insight into how often your car needs to be serviced. Keep in mind, each make and model is unique. Thus, you need to follow the instructions mentioned in the manual. It is only then that you can keep your car in the best possible condition.
If you have a newer model, you will be pleasantly surprised by how infrequently you need to get your car serviced. As vehicles become more sophisticated, they don’t need to undergo maintenance quite as often.
The fluids that flow through your car’s system are the lifeblood of the vehicle. Therefore, these fluids need to be maintained at an optimal level. This will allow the various components of the car to work smoothly, reducing the risk of mechanical issues or breakdowns.
The main fluids you should keep track of are engine fluid, transmission fluid, coolant, windshield wiper fluid, brake fluid, and power steering fluid. In newer cars, you may not be able to check the transmission fluid. So, you will have to check in with your mechanic frequently to ensure that it’s all in order.
Do you drive through lots of pollution every day? Or perhaps, you live in a particularly dusty area. In such instances, it becomes more important to change your air filters regularly. Harsh conditions tend to clog up the air filters more quickly. To prolong their lifespan, you may want to consider cleaning the filters as well.
So, why are these air filters so important? Well, they are tasked with only permitting clean air to enter the vehicle’s engine. This prevents any dirt and debris from getting into the engine and damaging it.
On the surface, it can often seem like your vehicle can handle any amount of weight. After all, the entire structure is made of steel! Well, appearances can be deceiving. While it may be physically possible for you to stuff an enormous amount of weight into your car, you shouldn’t be doing this.
Keep in mind, the more weight that you add, the more pressure you are putting on the vehicle’s suspension bushes, tires, and brakes. If this extra weight is maintained, then these parts are more likely to wear out faster and require replacement. So, do yourself a favor and keep the load inside your car to a minimum.
Most drivers don’t really think about their tires unless they have a flat. However, maintaining proper tire inflation is more important than you might think. Thus, whenever possible, check that your tires are perfectly inflated – under-inflation or over-inflation could spell disaster.
Overinflated and underinflated tires do pose a safety issue to drivers. Nonetheless, it is underinflated tires that can reduce the longevity of your vehicle. In particular, you may experience a drop in fuel economy as the engine will need to work harder to move the soft rubber over the road.
As car designs become more advanced, your dashboard may appear to be even more crowded with symbols. The first thing you need to know is what each of these symbols means. Now, the exact design can differ from one car to the next. So, it is best to go through your owner’s manual and figure out their purpose.
Of course, knowing what they depict is only half the equation. You must also pay attention to what these symbols are telling you. This is especially true if the light indicates that there is something wrong with a certain component. In this case, you need to pull over or contact your mechanic if you aren’t sure.
How many times have you noticed an issue while driving and told yourself you would check it out later? If you are like most drivers, you probably put it off until the problem worsened and then took your car to be inspected. Well, this is a habit you need to break.
Whenever you are aware of an issue, have it looked at immediately. This way, your mechanic can put a stop to the problem before it goes further. In the long run, this will save you quite a bit of money and time.
It is only natural that you will need to replace certain parts of your vehicle at some point or another. When the time comes, make sure to only use the highest quality components, even if they cost more. Not only will these parts help to keep your car moving smoothly for longer, but they are also covered by guarantees.
Although you may not think about it, the underside of your car is exposed to a lot of nasty things while on the road. This includes water, salt, dirt, and even corrosive materials. Moreover, this part of the car may not have as much protection as the body. Thus, you need to clean out the underside of your car as thoroughly as possible. This will prevent corrosion and other types of damage.
It is a good idea to keep track of your vehicle’s fuel consumption from the very beginning. This is because certain changes can actually point to problems within the vehicle. So, if you notice that your vehicle is guzzling up more fuel than usual, it is time to take it to the shop.
These are the top ten things that you can do to keep your car in great condition and running for as long as possible.
Source: https://www.pexels.com/photo/black-convertible-coupe-977003/
]]>
Thus, on this note,
Your car’s engine doesn’t just rely on fuel. It also requires electricity to power up and run. This is where spark plugs and their corresponding wires come in. As you can imagine, spark plugs get quite a bit of use and can begin to wear out after a while.
This means that at some point, your spark plugs will require replacing. The exact time will depend on the manufacturer’s instructions and just how much you put your engine through its paces. Nevertheless, it is important to replace your spark plugs as needed. If you fail to do this, you could cause the engine to run rough or even damage the cylinders.
This is advice that you have probably heard often but it bears repeating anyway. Understand, oil works to keep the various components of the engine well-lubricated so that they don’t get overheated. If you don’t change out the oil, you may end up causing permanent damage to your engine.
Now, the exact time of your oil change will depend on the make and model of your car. This is why your owner’s manual is helpful when it comes to figuring out when to change the oil. In most cases, newer cars don’t require as many oil changes while older models need more frequent ones.
It isn’t just engine oil that keeps the engine from overheating. The cooling system plays a rather important role as well. The entire system consists of the radiator, thermostat, water pump, and the coolant. The good news though, is that you mainly have to keep an eye on the coolant level.
To do this, just pop the hood of your car and look at the coolant tank. This is easy to spot. It is a clear tank and contains either orange or green liquid inside. This liquid needs to be below the maximum mark and above the minimum mark for the best performance.
Do you keep running your tank down to empty before fervently looking around for a gas station? If so, you need to change this habit. Keep in mind, fuel does tend to have a small amount of sediment in it. Thus, over the years, this sediment can begin to accumulate. For the most part, this doesn’t really pose a problem.
That is, of course, until you keep running on empty. When this happens, there is a possibility that this sediment will get through your fuel filter. This could result in internal damage or an engine that is forced to work harder than usual.
The good news is that you don’t have to drive around with a full tank at all times. Instead, focus on keeping it half-full. Or, at the very least, don’t run it down to empty.
The above point emphasized the importance of the fuel filter and how it works to keep any kind of sediment or debris away from the engine. During the course of this task, the filter can get rather clogged up. Thus, you may find that it’s more difficult to start up your car. It could be that acceleration is quite sluggish or even stalls when you try to leave the vehicle idling.
At this point, you may need to replace the fuel. Now, this isn’t something you can always manage by yourself. In some models, the fuel filter is rather accessible. Here, you shouldn’t find it hard to swap out the component with a new one. If you can’t get to it easily, you will need a mechanic to help you out.
Fuel is just one component that helps the engine run. Air – or rather oxygen – is just as significant. After all, it is only with the help of air that the engine can burn fuel. Naturally, for the best performance, the air entering the engine needs to be clear and free of debris.
Air filters are responsible for keeping dirt, dust, and other types of debris away from the engine. However, in the process of doing this, the filters themselves can become clogged up with grime. As a result, they become less efficient at their job.
Most manufacturers will offer their own guidelines on how often the filter needs to be changed. At the same time, you should pay attention to the conditions you drive through every day. If your car is constantly exposed to pollution, dust, and poor road conditions, you may need to change the air filters more often.
Your belts work every time your engine does. That is to say, they are constantly in use and this can lead to a fair amount of wear and tear. Now, it’s important to catch this deterioration before it becomes too significant. The last thing you want is for the belt to snap while you’re driving. This can cause extensive damage to your engine.
To avoid this, make it a point to check your belt every now and then. As you can imagine only do this when the car has been at rest for some time and has completely cooled down. See if any parts have been worn away or if there are any cracks. This is a sure sign that it needs to be replaced immediately.
These are the top precautions and practices you can take to keep your engine in the best possible condition. As a result, your engine will function smoothly for a longer period of time.
Source: https://unsplash.com/photos/VurHDpO4VYI
]]>Of course, if you want to steer clear of engine issues, you must first be aware of the most common culprits. You can then take the necessary steps to ensure that you don’t fall prey to them.
Engine oil is often called the lifeblood of your engine and this is certainly true. It is responsible for keeping all the parts well lubricated and cutting down on the risk of wear and tear. What’s more, the oil also gets rid of dirt, grime, and other types of buildup in the engine, preserving it even further.
Considering all it does, the oil does degrade the more you use your vehicle. Eventually, its lubricating capabilities will be significantly reduced. This leads to an increase in friction between engine parts and can even result in carbon deposits in the engine. Essentially, you need to change your oil as recommended.
The good news for you is that modern engine oil functions incredibly well. As a result, it doesn’t need to be changed as often. Nevertheless, it is important to follow the instructions in your car manual and to get the oil changed out as stated. This can keep a world of engine issues at bay.
From the above section, it is clear that engine oil is important to the proper functioning and continued longevity of your vehicle’s engine. At the same time, this doesn’t mean that you can simply add any type of oil to your car. You must find one that is specific to your make and model. Otherwise, you put your engine parts at risk of friction.
See, each engine has its own requirements. On top of this, oil can also be affected by external temperature and weather. Thus, you need to select the right oil to ensure that it can effectively lubricate the parts depending on engine pressure, load, temperature and more.
Once again, this is where your car manual comes in. Your car manufacturer will outline just what kind of oil you need to use for the best performance and protection. You should also follow any additional instructions regarding seasonal changes. For instance, you may be expected to use oils with different viscosity depending on whether it is winter or summer.
You don’t need to be told than an overheating engine isn’t a good thing. However, do you know exactly what kind of issues this can cause? Well, an overheated engine can result in cracked seals and gaskets, warped cylinder heads, and even irreversible engine damage.
Now, one of the main causes of an overheating engine is a poorly maintained cooling system. As the name suggests, a cooling system is where the coolant is circulated through an engine. This removes the heat from the engine and to the radiator where it is cooled.
Of course, for this to happen, the coolant level must be maintained. If it isn’t, there won’t be sufficient fluid to cool down the engine as needed. To avoid this issue, keep a close eye on the coolant level. It needs to be between the minimum and maximum marked levels.
Another reason that your engine may be giving out rather quickly is due to covering long distances on a consistent basis. Since the engine is an integral part of the system, it is constantly working while you drive. Naturally, this can lead to greater wear and tear. In turn, this can cause more issues, resulting in an engine breakdown.
Fortunately, there is something you can do to counteract this issue. As long as you stay on top of maintenance, you can replace or tend to any parts that wear out. Thus, you can deal with them before they do any kind of damage to the engine or other parts. This will help lessen any issues that would typically result from wear and tear, extending the life span of your engine.
Sediment, water, and various other substances can enter gasoline reserves in a variety of ways. Unfortunately, you wouldn’t know if this sediment is present when you pump the gas into your car. On the upside, it is unlikely that this grime will do any damage to your engine.
This is because the gunk tends to settle at the bottom. What’s more, the fuel filter does a good job of keeping these substances out of the engine. This, however, is provided that the fuel tank is at least partially full at all times.
Understand, if the fuel levels drop too low, there is a higher chance of the sediment being picked up. In some instances, it may even be able to pass through the fuel filter and enter the engine. This can lead to damage and reduced engine performance. Thus, keeping your gas levels up at all times is a habit you should get into.
These are the top culprits that can shorten your car engine’s life cycle. Of course, since you are now aware of them, it will be a lot easier to sidestep these issues in the future.
Source: https://unsplash.com/photos/OwBRQ0bykX8
]]>Don’t worry, there is still a lot you can do to remedy the situation. Just make a note of the driving habits that you should be learning and be sure to follow them whenever you’re on the road. You will end up doing your car’s engine a world of good!
You’ve probably heard of breaking in new shoes, but have you ever heard of breaking in a new engine? If the answer is no, you certainly aren’t alone. Nevertheless, it is important to be gentle with a new car. During this period, you will “prep” your engine so that it is capable of running as smoothly as possible. This helps to maintain the longevity of this component.
So, how do you break in your engine? Now, the exact details can vary from one make and model to another. Thus, it is a good idea to check your car’s manual. If you aren’t in the mood to do this, though, the process is quite consistent among all cars.
The break-in period is often between 600 and 1000 miles. During this time, you should follow these guidelines:
Don’t reach the top speed or wide-open throttle
Vary the RPM across the middle range
Avoid hard stops
Don’t tow
Yes, you may get a little frustrated following these rules during the break-in period. However, you will be glad that you did so in the long run.
There are many reasons why you shouldn’t speed. Certainly, safety is a big factor as it’s easy to lose control of your car when driving at higher speeds. If this isn’t enough motivation, you may want to slow down simply to stay on the right side of the law.
Now, there is a third reason why you should travel at a more reasonable speed – your engine. Every car has an ideal cruising speed. This tends to be around 55 to 65mph. At this point, your engine has to make an effort to keep the car moving, but not much.
All this will change if you try to go faster and especially if you try to hit top speed. Then, your engine is forced to work harder. Not to mention, it has to use more fuel as well which forces the pistons and other parts to work at a more furious pace.
If this is something you do on a continuous basis, you may find that your engine begins to wear out rather quickly. So, do yourself a favor and try to stick to the cruising speed as much as possible.
If you have an automatic transmission system in your car, then you don’t really need to follow this tip. On the other hand, if you have an old or newer manual transmission, this is a point you should pay attention to.
The first thing you need to avoid is “lugging”, so always make certain that you are in the right gear. Lugging is when the car shakes or moves too slowly. Such a phenomenon occurs when you are driving in a gear that is too high for your speed. Lugging can put a strain on your engine and result in cylinder head damage.
Another similar driving habit to steer clear of is “engine braking”. This is when you are driving in a higher gear and then move to a lower one. As you do so, you remove your foot from the gas. The result is that your car slows down without using the brakes.
Some people may use engine braking to make it easier to navigate corners more efficiently. Keep in mind that this strategy also causes wear and tear on your engine. Therefore, it is best to keep the engine braking to a minimum.
Most people find it difficult to wake up and get moving on a cold day. Well, your engine is a lot like that. When the temperature drops, batteries discharge more quickly and have a lower charge in the morning. This, in turn, means that the engine requires more power to start up.
There is also the fact that oil is affected by the cold. It is thicker, reducing the efficiency of the moving parts of the car. Last, but not least, fuel can be more difficult to burn in low temperatures. This is why it is important to give your engine plenty of time to warm up before you hit the road.
What many people don’t realize is that smaller cars aren’t meant to haul around heavy loads. It is mostly larger vehicles with big engines that have been designed to tow and carry heavier weights. So, if you have an average-sized vehicle, you may want to limit how much you carry.
When you try to make your car transport heavy loads, you are actually putting quite a bit of strain on the engine. And, as mentioned, this can result in wear and tear as well as damage. This is especially true if you are carrying loads through rough terrain.
To know just how much your car – and engine – can handle, check out your owner’s manual. This will tell you how much weight you can safely carry without doing any damage to the engine.
There you have it – the top driving habits that will help extend the life of your engine. Follow these and you are guaranteed to be able to cut down on repairs, replacements, and more.
image Source: https://www.pexels.com/photo/person-driving-car-1073031/
]]>Of course, if you have owned a fair share of cars in your own lifetime, you will be aware that this isn’t always the case. Many cars breakdown well before their time. There are many reasons why this can happen.
Poor maintenance, road accidents, and other issues may result in the early demise of your vehicle. However, there are certain instances where the cause is not apparent. If you have ever wondered about this.
You don’t need to be told that the quality of your vehicle matters. It is common sense – a well-built car will last a lot longer than one that is poorly constructed. The problem arises, however, when most people are unaware of what makes a good and reliable car.
For instance, many people will imagine that well-known car manufacturers are the most dependable. This means that you would probably name brands such as Volvo, GMC, Ford, and Mercedes-Benz as good, solid cars. The truth is that these cars scored rather poorly when it came to reliability.
In fact, brands such as Volvo and GMC were at the bottom of the list – Ford was only several steps ahead of them. Many cars in these lineups were plagued with issues that cut down on their longevity.
Instead, it was car manufacturers such as Lexus, Toyota, Mazda, and Subaru that topped the charts. So, the next time you want a car that will last longer, it is a good idea to do your research first.
Many people live in regions that experience rather extreme conditions during certain times of the year. Thus, during the summer you may experience soaring temperatures and heat-related issues. On the other end, extreme cold may the primary problem.
Well, such severe weather conditions can cut down on the lifespan of your car. This is because the climate can have a negative impact on various parts of the car.
For instance, in very cold weather, certain parts of the vehicles may collect condensate. This, in turn, means that the liquid can turn into ice and back again as the temperature varies. This can mess up the power steering and the brakes. There is also the fact that salt on the road can speed up corrosion.
In very hot weather, you have to be mindful of hoses and belts. Extreme heat can cause cracks and other types of damage. The result of this can often be an overheating engine which can lead to long-term damage. Not to mention, humid conditions can cause tires to burst or pop as well.
One way to avoid such problems is to prep your vehicle for the coming weather. Take it into the shop and make sure that all fluids are topped up and that everything is in working order. Furthermore, you should shelter your car in such a way that it has limited exposure to the elements.
Road conditions are steadily worsening in many regions. Not only does this make for many uncomfortable rides, but it can also reduce the lifespan of your vehicle. On average, it is estimated that car owners spend over $1000 every year on damages caused by bad roads.
These issues include but aren’t limited to blown tires, broken axles, and battered shock absorbers. Not to mention, frequently driving on such roads can reduce the overall structural integrity of your car. Thus, if you live in such an area, it could be that your car may not last as long, regardless of how well you maintain it.
Apart from the make and model, the next factor that can impact your car’s longevity is maintenance. It is no secret that proper upkeep and care can help keep your car running for much longer. Naturally, your mechanic plays a rather important role in this too.
Well, this is why a bad mechanic can actually reduce the lifespan of your car. A poor technician can cause problems in a number of ways. For instance, if they aren’t very diligent, they could end up overlooking certain issues that need to be attended to. Without proper intervention, these can go on to become a lot more serious.
Or, a mechanic might make a mistake during a repair or routine maintenance. This could result in damages to the vehicle which will automatically impact its performance and allotted lifespan. A less-than-honest technician may fit your car in with poor quality parts. These will not last as long and will naturally affect the surrounding parts as well.
This is why it is quite so important to take the time and effort to find a good mechanic. With their help, you can really maximise how long your car will last.
These are the obstacles to your car’s longevity that you might not have been aware of. Fortunately, most of these issues can be addressed. So, as long as you take the necessary precautions, you could end up using the same vehicle for years on end.
image Source: https://unsplash.com/photos/ZRns2R5azu0
In fact, modifying your car can also impact its longevity. If you aren’t entirely convinced, that’s understandable – car mods are cool, after all. Still, you need to know why making these changes can shorten your car’s lifespan.
To begin with, let’s take a look at what car modifications are. In reality, there are three types of modifications – performance, functional, and aesthetic. Making aesthetic changes to your vehicle isn’t necessarily a bad thing. As long as they are purely cosmetic, they shouldn’t mess with the performance of the car.
The same thing can be said for functional modifications as well. These can include parking sensors, improved air conditioning systems, or roof racks. In short, they make your vehicle easier to use or just a little more efficient.
The modifications that you need to stay away from are performance mods. As the name implies, they change the way your car drives or performs. Some of the more popular performance mods are suspension alterations, turbochargers or superchargers, and nitrous oxide.
There are several ways that you can modify the performance of your car. As mentioned, one of the more common alterations involves the suspension. However, did you know that lifting the suspension results in a higher center of gravity? In turn, this can reduce the stability of the vehicle, even when you are driving at lower speeds.
If you decide to modify the engine, you may discover that it requires special handling. Thus, if you are an intuitive driver, the car may become more difficult to handle. And, if you are thinking of swapping out your current brakes for performance brakes, think again. Not only do these cause a lot of problems, but they also have to be replaced more frequently.
What if you were to just swap out wheels and tires for plus-size ones – would this be OK? Once again, the answer is no. Even a small change like this can mess with the vehicle’s handling, braking system, and the suspension all at once.
Clearly, lifting your suspension isn’t a good idea. So, what if you were to lower it? Unfortunately, this kind of modification may damage your car body. Keep in mind, you will be physically lowering the car body as well. This puts the panels at greater risk of being scraped and warped.
So, why does leaving your car “unmodified” help it last longer? Well, let’s find out.
As you may be aware, manufacturers test their cars thoroughly. When they do this, they are individually and collectively testing all the car parts involved in the performance of the vehicle. Thus, a manufacturer can be absolutely certain that all these parts are functioning properly. Thus, they are designed to last longer within the system.
However, this guarantee or warranty doesn’t take into consideration the possibility that you might introduce new and untested parts. Therefore, you could be jeopardizing any number of internal systems by including the mods. Keep the original parts, and you won’t have to worry about this issue!
Following up on the point made above, original parts are made to sit next to and function with other original and coordinating car parts. Due to this, they work smoothly together. This is what produces optimal performance.
These original parts aren’t designed to fit with or work with car mods or vice versa. So, these new car mods run the risk of damaging the components they are fixed with. This can happen during the installation process as well as when you are driving the car.
You don’t have to be told that it is important to only use the highest quality parts in your car. Now, when you are simply replacing existing car parts, verifying the quality is easy enough. Just choose a reliable brand and you can be certain that the component will function properly. Even if it doesn’t, you will be covered by a warranty.
Car mods, on the other hand, can be more difficult to verify. This is especially true if you are considering a mod that isn’t exactly legal. So, you may have trouble determining whether a particular part has been well-designed. Not to mention, if you introduce a poor quality part into your car, it could spell disaster for the system as a whole.
The verdict is clear – if you want your car to last longer, steer clear of modifying it. Or, if you do decide to modify it, make sure that you only make cosmetic changes. These shouldn’t change the overall performance of the car and should be easy to remove if necessary.
Image Source: https://www.pexels.com/photo/silver-sports-car-1329999/
]]>Do you think you harbor such misconceptions? Read below to find out, and get things cleared up:
This one is tricky. Bad headlight bulbs could cause flickering, but it’s not the only reason. There are many reasons why flickering can occur, such as:
If the bulbs are the problem, flickering should go away once you replace the bulbs. In some cases, it doesn’t. It’s recommended to have the flickering problem checked out by a mechanic to properly solve it.
Investing in high-quality bulbs can minimize the risk of your headlights flickering. Carifex offers highly rated LED headlights with anti-flickering features. These bulbs have heat sinks and can better retain power to prevent flickering.
All in all, it’s hard to know what causes headlight flickering without a thorough check done on your vehicle. While it’s important to buy high-quality headlight bulbs, make sure that nothing else in the car is causing the flickering.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
Are HID bulbs brighter, longer-lasting, and overall better than LED bulbs? Not necessarily. It depends on how you define “better.”
HID lights are largely an improvement on old halogen bulbs. HIDs have high light intensity and emanate a bright color. LEDs are also known for intense bright light. Both versions can reach similar lumens, but LEDs can create more focused light, better for distance viewing.
What’s more, LEDs last longer than Xenon bulbs. They are considerably more efficient. These days, you can even get eco-friendly LEDs.
This is a very common misconception. That’s mainly because drivers confuse beam length with illumination.
Illumination refers to how bright a bulb is. This is usually measured in a count called lumens. The higher the lumen count, the brighter the bulbs.
Beam strength or length refers to how farther the light shines. Despite popular belief, this doesn’t have much to do with the luminescence of the light. Beam length is determined by the reflector and another part called the projector.
The projector focuses the light and the reflector directs the lights toward the road. The further the beam reaches, therefore, depends on these parts, not necessarily the bulb itself. Having bright bulbs can certainly help you have a powerful beam.
LED bulbs can offer more brightness compared to halogens or Xenon bulbs. Therefore, they are great for seeing far down the road. If your car has a beam problem, it’s not the bulb you need to look at. If the headlight bulb is adequately bright, get the reflector and the projector checked out.
Every driver wants clear headlight covers so the bulb beams can shine through. Car owners commonly see their headlight covers becoming yellowish or cloudy over time. Some think the hazing occurs because of dirt and dust from the road crusting on the lens.
Dust particles can build up on headlight covers and interfere with beam transmission. But this is not why hazing occurs, and seriously dulls headlight illumination.
Headlight lenses are made from polycarbonate plastic. When it catches sunlight, the plastic gets oxidized, creating a cloudy film. It doesn’t go off no matter how many times you wash your car.
When your car comes fresh out of the factory, the plastic lenses of the headlights are well coated with a UV ray guard. This prevents the lens from catching the type of light that leads to oxidation.
This protective film can wear off over time, much like a protective coat of paint. You will notice the UV sealant needs replacing when the headlights get cloudy. You could scrub and polish off the oxidation with gentle sandpaper, toothpaste, or special solutions found in headlight brightening kits. Afterward, apply the UV sealants to restore the headlights back to normal.
This is a widely held belief among DIY mechanics. When the headlights become dull, you shouldn’t immediately suspect a poor connection. The usual suspect is, surprisingly, corroded ground wires.
When car owners think of cleaning headlights, they only think of washing the headlight covers. To ensure the longevity of all parts of the headlight, you need to occasionally clean behind the reflector as well. You will need to disassemble the headlight and the reflector to reach the wires.
Use a wire brush to remove debris and corrosion from the connection. Then, coat the wire with dielectric grease to slow down corrosion. While you’re at it, check the other wires for damage and corrosion as well.
Make sure you have the right information on hand before applying a DIY fix to any headlight issue. Never delay going to a mechanic if you are not sure about how to get a headlight problem fixed.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
]]>You can check out the following list for headlight problems car owners typically run into, with suggestions for possible fixes:
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
This is an easy problem to solve. If only one of the headlamps isn’t working, then this is most likely because the bulb has burnt out.
Replace the old bulb and the headlight should work as usual. When you replace one, it’s always best to check the other as well. If one bulb has died, the other might go out soon as well. As a precaution, you should consider replacing both at once.
There are many reasons why headlights may flicker. The bulbs could be dying, or may not be connected to the vehicle properly. Internal wiring issues can also cause this problem.
High power-consuming accessories, like stereo systems, can draw power away from the headlights. They flicker as a result.
You should first get your car checked out by a mechanic to diagnose the exact problem. Easy fixes like properly connecting the bulbs to the car could potentially solve the problem.
You can also benefit from anti-flickering headlights (check these out in our shop). These are specialized bulbs with built-in mechanisms to reduce the chance of flickering.
Dull headlights are the result of two issues. Either the headlight bulbs have a problem or it’s the headlight cover.
Inspect the headlight cover for haziness or a yellowish color. Cloudy headlight covers are quite common. This occurs when the UV sealant on the covers wears off. The plastic of the covers, when exposed to sunlight, becomes oxidized.
To brighten up hazy headlight covers, first wash them with soap and water. Then you can polish it with toothpaste to remove the oxidation. There are also at-home headlight cover brightening kits.
If the issue is with the headlight bulb, consider replacing it. It’s highly recommended to switch out old halogen lights with LED bulbs. Carifax has a range of LED bulbs that are brighter than halogens, and also last a long time.
The headlights may work, but the beams are not as good as they should be. This is commonly caused by aging headlight bulbs. Replacing the bulbs may restore the old beam strength.
Foggy headlight covers can also affect how far and wide the beams go. Clean the headlight covers as instructed above to restore maximum visibility.
Hazy headlight covers are due to oxidation. So even if you wash your car daily, headlights covers are still vulnerable to this. Once you polish and clean the lenses, always remember to apply UV sealant. It’s this material that keeps the headlights from getting cloudy.
In case the beam strength continues to be unsatisfactory, you can consider replacing the bulbs. LED bulbs can create bright and powerful beams. Xenon bulbs aren’t bad either, though they don’t last as long as LEDs.
Does flickering occur only when the car is moving? Are the headlights fine when the vehicle is parked?
Headlights going on and off when you drive, especially on rough roads, is almost always caused by a bad connection. Your headlights are not attached to the vehicle properly.
This is not difficult to fix. Remove the lens covers and tighten the bulbs. Make sure you don’t tighten too hard.
Be careful to check if the wires are in order. Kinking in the wires may cause flickering issues. Get the wiring checked out by an experienced mechanic to ensure the poor connection isn’t caused by a physical problem.
The vast majority of the time, headlights problems are caused by bulbs issues. Therefore, make sure your vehicle has reliable, high-quality headlight bulbs properly installed.
Your headlights shouldn’t cause problems too often. If they do, you need to get the internal system checked out by a professional mechanic.
As most headlight problems are minor, you can apply DIY fixes as explained above. So don’t panic if your headlights aren’t working. Go through the list above to see if your problem has an easy, at-home solution.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
]]>DIY headlight cleaning is fairly easy to do. You don’t need quality equipment for the job, and common household items would do the trick.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
Do you really need to buy an expensive kit to clear up yellowish headlight covers? Not necessarily.
To fix yellowing, you first need to understand it. Your headlight covers come with a coating to protect it from harsh UV rays. But over time, this coating wears off, exposing the plastic underneath to the sun. Yellowing happens when the plastic absorbs blue light from sunlight, changing the color.
Washing the headlight with car soap won’t fix this problem. However, you can buy a headlight restoration kit to remove the carbonic reaction with special chemicals. This option can be expensive, though.
You won’t need a restoration kit if you have some transmission fluid at home. Apply a thin layer to the headlight cover and wipe it off. It should help clear the discoloration.
Oxidation is not the only reason why headlight covers become hazy. Don’t rule out dirt and debris from the road. Dust particles and grime can really build up on headlight covers if you don’t regularly wash your car. Buildup like this can hinder proper vision too.
Even if you don’t have time to wash the entire car, just do the headlight covers. Use your regular car wash soap and a microfiber cloth or a sponge. You can choose a detergent formulated to work with plastic parts in the car.
There’s another benefit to washing your headlight covers: once the dust is gone, it would be easier to examine oxidation damage. You should, therefore, wash the headlight cover before applying any anti-hazing treatment.
You may have heard of this DIY trick already. Yes, toothpaste can eliminate oxidation damage from your headlight covers.
But it’s important to properly use toothpaste. Just rubbing it on won’t really help. First, you need to wash the headlights with soapy water. That should remove the outermost layer of dust. Then, wipe them clean with a microfiber cloth.
Toothpaste can work like a miracle on headlights because of the light abrasives in it. The abrasives rub away at the oxidative damage. The result is much clearer headlights.
However, don’t go overboard. Use a small amount and apply it directly to the middle of the headlight. Leave it on for a minute or two. Use a microfiber cloth to scrub away in circles. You can add more toothpaste as needed.
A word of caution: don’t let the toothpaste get on the paint around the headlights. The abrasives would damage the coating. Use tape or something similar to protect the painted area around the headlights.
It’s quite important to choose the right toothpaste to get the job done. Avoid gel toothpaste, as it doesn’t have the abrasives necessary for scrubbing. Also, avoid toothpaste with microbeads or large particles. You could end up actually damaging the headlights with harsher abrasives.
The toothpaste treatment is not permanent. It’s recommended to try this every two to three months to keep headlight covers clearer.
Using sandpaper to scrub away yellow crust is one of the best-known methods for keeping headlight covers clear. This works quite similarly to toothpaste. However, you can remove more crust with the right sandpaper.
This doesn’t mean that you should grab some sandpaper from your toolshed and rub away. Sanding should be done very carefully to avoid any physical damage to the headlight plastic covers. Instead of sanding dry headlight covers, wet the headlights in advance.
You can start with grittier sandpaper. Then move onto finer ones. However, you need to be gentle and avoid causing permanent scratches on the plastic.
Once the sanding is done, wash the headlights again. They should now look clearer. Don’t forget to apply UV sealant when you are done.
While restoration kits are not for everything, they certainly have their uses. The typical headlight restoration kit comes with an array of material to eliminate haziness. There will be sandpaper, washing liquid, polishing material, and even UV protective sealant.
If you have a lightly stocked garage, investing in a headlight restoration kit is the best option. A highly rated kit would have everything you need to clear up oxidation.
More importantly, kits come with sealants to apply after the cleaning process. Protective sealants are essential for preventing further oxidation damage.
The key to success here is finding a good restoration kit. Don’t forget to follow the instructions closely. Otherwise, you could damage the plastic on your headlight covers.
Keeping your headlights clean and clear does not have to be a tiresome process. You would need to apply any of the above fixes at least three times a year.
The most important part is applying a UV sealant once you clean the covers. The sealant is absolutely essential for preventing further hazing. All your hard work would go to waste if you fail to do this.
DIY headlight cleaning is sufficient for most vehicles. However, if you notice very severe yellowing or damage to the headlight covers, it’s best to take the car to a mechanic for a professional analysis.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
]]>Overtime, headlight bulbs become dim or dull. There are several reasons for this. For example, how often you use the headlights can determine how long the bulbs will last.
The quality, make, and type of bulb play a role as well. The climate in your city or town also has an impact.
Some factors, like the temperature of the road, are things you can’t change. But there are certain measures you can take to extend the life of your headlights.
Here are the primary ways you can ensure that your car lights last a long time:
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
The type of bulb plays a huge role in how long your headlights last. Some types of headlight bulbs have a shorter lifespan than other types.
Vehicles commonly use either halogen, LED, or Xenon light bulbs. Halogen bulbs are typical incandescent bulbs that last only about 1,000 hours of use. Xenon bulbs are bright and can last twice as long as a halogen bulb.
If you want longer-lasting bulbs, it’s highly recommended to switch to LEDs, which can last up to 20,000 hours!
LED bulbs are brighter than halogens too. Some LED bulb brands offer perks like non-flickering features. You can check out long-lasting and non-flickering LED headlight bulbs on Carifex.com.
A simple upgrade to an LED bulb can greatly extend the life of your headlights. You can save time and money replacing your car lights.
If you buy aftermarket headlight bulbs at dirt cheap prices, don’t be surprised if they burn out in two weeks. Invest in a good brand of bulbs to ensure long-lasting quality.
Car owners are usually advised to stick to OEM products because the quality is guaranteed. For headlights, however, aftermarket products aren’t bad either. In some cases, they might even be better.
Carifex, for example, specifically designs headlights to fix common issues like flickering and short lifespan. Specialized aftermarket products like this can benefit you.
However, stay away from super-cheap products found on various online shopping sites. Read professional reviews to find out which brands are the best.
Incorrect installation could lead to a number of problems with headlights. They might start flickering, for example. Improper installation can exhaust your bulbs more than usual so they don’t work as long as they are supposed to.
Screwing in headlight bulbs isn’t rocket science. However, do take care to follow the instructions properly.
The wiring behind the headlights shouldn’t kink when you install the bulbs. When driving, the bulbs should be intact and not shake.
When you are not sure if you’ve done the job right, just stop by a mechanic to have the headlights professionally inspected. Or just ask your mechanic to install the new headlight bulbs properly.
The life cycle of headlight bulbs is the same as that of a household bulb. If you leave it on during the daytime, it would lose its durability faster.
Make sure your headlights are turned off when you don’t need them. Most drivers don’t carelessly keep headlights turned on, of course. However, some do keep them on during outings like camping trips.
Use flashlights or camping lamps to illuminate areas in the dark instead of relying on headlights. You should make sure the bulbs work properly before driving at night.
Keep to smooth roads to maintain the longevity of your headlight bulbs. Avoid bumpy roads with potholes that make the car shake. These little vibrations can adversely affect the duration of the bulbs.
Bumpy roads can damage other parts of your car too. Therefore, practice good driving to make your headlights last longer.
As mentioned earlier, various factors contribute to extending the lifespan of a headlight bulb. The above-listed points provide suggestions to extend the life of your headlights.
To keep the headlights functioning at their best, make sure to follow these steps. Choosing the right type of bulb, the right quality, and proper installation are crucial to ensuring optimal headlight longevity.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
]]>It’s one of those things that sound too good to be true. Could toothpaste really restore your headlight covers to their original brightness?
In a way, yes. However, you might have to adjust your expectations. Also, this solution doesn’t always work.
Read on to learn the truth about dull headlight covers and toothpaste fixes:
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
Before we get to the nitty-gritty of toothpaste cleaning, it’s important to understand why your headlight covers look dull. Hazy headlights result from more than just dust and debris.
Everyday pollution on the road may create a film of grime over the plastic that covers headlamps. However, grime can be washed off. Hazy headlights will look dull no matter how much car wash detergent you use.
That’s because the discoloration is actually caused by oxidation. Car headlight covers are made from a type of plastic. When exposed to UV rays through sunlight, this material undergoes a chemical process. It makes the clear plastic appear cloudy.
Automakers apply a protective sealant on headlight covers to prevent oxidation. However, this coating doesn’t last very long. With use, it wears off, exposing the plastic underneath. That’s why your headlight covers get cloudy as the car gets older.
Yes, it’s possible to remove the residue of oxidation and restore the original appearance of the headlights. There are many ways to do this. Toothpaste is just one solution you can try at home.
Is there any special feature in toothpaste that allows it to restore yellowed out headlight covers? Yes, and no.
Toothpaste cannot actually reverse the oxidation process. But it contains a component that can help you scrub off the discoloration: abrasives.
You may not really think about it when you brush your teeth. But standard toothpaste comes with particles that rub against the enamel of teeth to remove plaque. This is a much gentler version of sanding. Toothpaste can effectively polish and buff dull headlights and restore brightness.
Therefore, toothpaste can really be useful for removing the oxidized layers of headlight covers. The mild abrasives scrub off discoloration without permanently scratching and damaging the plastic.
The toothpaste fix for dull headlights it easy to apply. However, there are some crucial steps to take into account. Otherwise, you could end up permanently scratching the delicate surface of the headlights.
Word of caution: This method only works on plastic headlights, as described earlier. If you have dull glass headlights (typically found in older car models), you need to get it fixed at the mechanic.
It’s important to choose the right toothpaste for the job. What you need is regular, white toothpaste.
Avoid using gel toothpaste because it doesn’t work the same way. Most gel toothpaste varieties lack the abrasives you need (that’s why these products are clear). Stick to cheaper toothpaste as they work perfectly.
There are some toothpaste types that you definitely don’t want near your headlights. These are brands with microbeads. Certain toothpaste types include small plastic particles that would cause scratches on your headlights. Avoid this type as well.
Once you have the right toothpaste, how can you get it to work? The below section explains the right way to use toothpaste to brighten up hazy headlights.
The process is relatively simple and straightforward. Here it is:
The toothpaste should only touch the headlight covers. If it gets onto the paint, the chemicals may scratch or discolor the layers.
To avoid a paint disaster, use tape to cover the area surrounding the headlights. This will stop you from accidentally scrubbing off the paint as you polish the headlights.
Wash your car’s headlight covers as usual with car wash soap. You don’t need to wash the whole car, just the headlights.
After rinsing, use a microfiber cloth to dry the headlight covers. Don’t use a cloth that might leave lint on the surface.
Washing headlight covers is important because it removes layers of dirt and grime that contributes to discoloration. So don’t skip this step.
Squeeze a dollop of toothpaste onto the middle of the headlight cover. It should be about the size of a chickpea or a dime.
Then use a microfiber cloth or a sponge to rub the toothpaste into the headlight covers. Gently polish in circular patterns. You can add more toothpaste if needed.
Polish as vigorously as you can. However, don’t press too hard because you might damage the headlights.
Once you rub in the toothpaste, leave it on for two to three minutes.
Use warm water to completely remove the toothpaste from the headlights. Warm water works better to get all the layers off. Don’t leave behind any toothpaste, as it would create a whitish film over your headlights.
Using a hose or a sprayer would help a great deal in getting all the toothpaste off. Once you are done, remove the tape around the headlights.
This step is crucial to keeping your headlights bright and clear throughout the year. The headlight covers would continue to get cloudy as long as the plastic is exposed. Applying sealant would reign in the oxidation and keep your headlights bright for longer.
You can buy UV sealant for vehicles at most auto shops. Even some gas stations that sell motor oil may have this product.
Follow the instructions in the sealant bottle to apply it properly. Usually, you just need to apply a single thin layer. This won’t take long. It’s advisable to wear gloves to prevent the chemicals from getting on your skin.
And that’s the last step. Your headlights should now look brighter than they used to.
Keep in mind that this treatment only works with oxidized headlight covers. In some scenarios, physical damage could have dulled their appearance. In that case, you will need to replace your headlight covers.
Washing your vehicle regularly can slow the process of dulling headlight covers. However, this doesn’t entirely prevent the process of oxidation. Once the sealant wears off, yellowing is quite inevitable.
What’s important is that you clean your headlight covers and apply the necessary sealant. Now your headlights are good to go for another year or so without discoloration issues.
Check Out The CARIFEX® Premium LED Headlight Bulb Sets and the CARIFEX® Non-Flickering LED Headlight Sets and Elevate Your Driving Experience, Today!
]]>What’s the best way to fix flickering headlights? There’s no simple answer here. Read below to learn more about the causes of flickering headlights and possible fixes you can easily get done at home:
There are many reasons why your headlights might flicker. Usually, the problem occurs because of electrical system failures.
The rate at which headlights flicker can sometimes pinpoint the reason. For example, do the headlights flicker at random, or do they go on and off at regular intervals? The former is typically caused by a loose connector, while the latter indicates a wiring problem.
The headlight flickering would happen when you are driving. They should not be going on and off while the car is parked or otherwise turned off.
Let’s look at some of the most common issues that cause headlight flickering:
Headlight bulbs, like household bulbs, have a lifecycle. When the bulbs get too old, they may not work properly. Physical damage to the headlamps may sometimes cause flickering. Therefore, it’s worthwhile to remove the bulbs and inspect them for problems.
The car battery powers the headlights. If the battery is at the end of its lifecycle, the headlights may not receive the right amount of power to function normally. Other battery problems, too, could cause headlight flickering. Therefore, do check the car battery if you notice your headlights flickering.
Car alternators have voltage regulators inside to keep electrical current outputs consistent. However, this voltage regulator doesn’t last forever. Failing is gradual, and when the process begins, the headlights may receive inconsistent electrical signals. When this happens, flickering occurs.
If the headlight bulbs are not connected properly to the wiring system, flickering is inevitable. This is not hard to spot if the flickering is irregular. For example, do the headlights flicker when you are driving on a rough road that might make the car shake? If so, loose connectors or even fuses might be to blame.
Incorrectly placed wires or excess stress on wires that connect the headlights can cause flickering too. Wires can get stressed because of heating from the engines, excess current, or kinks. Bad wiring causes incoming voltages issues for headlight bulbs. If they don’t flicker, they might stop working.
Headlight flickering is primarily a current flow problem. It can happen when the car’s internal system doesn’t communicate with the headlights properly. If your car has accessories that draw in massive amounts of power, essential components, like headlights, may not get enough. Tire pressure monitoring systems, for example, can alter how the current system is distributed in your car. Massive stereo systems can do that do. Keep an eye out for similar accessories.
There are other reasons why headlights may flicker, but the above are the most common.
Available to order here Carifex - Non-Flickering LED Headlight Set
To fix any problem, you need to first diagnose the cause. As there are many reasons why headlights flicker, as mentioned above, it could be tricky to diagnose the issue.
Some things are easy to check. For example, you can physically remove the headlight covers to inspect the bulbs for damage. Checking for wiring problems, or electrical system failures may require a bit more skill.
If you are familiar with your car’s engine and internal parts, checking the system for the cause of flickering lights will not be a problem. If not, it’s best to take your vehicle to a mechanic for a proper diagnosis.
It will really depend on the problem. Some problems are easy to fix at home. For example, if your headlamps have dying bulbs, it’s easy enough to replace the old ones with a new pair. But if the wires are overstressed, you may need to work some more.
Fixing flickering headlights also involve prevention. Some problems, like inconsistent current distribution, can recur if you don’t safeguard against the problem. You can buy certain accessories to help with issues like this. They are discussed below.
You can have several possible fixed for common headlight flickering issues. Take note that it doesn’t list all fixes and doesn’t include fixes for rare or unusual problems. Here it goes:
Perhaps the easiest way to fix flickering headlights is to replace the bulbs and see if this solves the issue. Remove the headlight protection cover to inspect the bulbs. Unscrew and check for possible damage or discolouration.
Gently touch the bulbs to see if they wobble. The bulbs should not be loosely attached. If they are, that’s definitely what’s causing the flickering.
To check for wiring issues, you need to check under the hood of the car. Locate the wires that attach to the headlights. Visually inspect these wires for breakage and kinking. Additionally, check the wires of the fuse panel behind the steering wheel column on the driver’s side. Inspect these wires for damage as well.
If you notice frayed or broken wires in either place, take the vehicle to a mechanic for fixing. Messing with wires at home is not advisable.
You should check the alternator belt for any signs of fraying. When you start the engine, check the battery light. If it lights up, then the alternator is failing. Get the alternator replaced or fixed at a mechanic to fix the flickering lights issue.
A battery low on juice may cause flickering lights. Therefore, check the car battery health. If the battery’s not looking so good, get it replaced. You can do this at home or at a mechanic’s.
Assess all the electrical accessories in your car that the battery powers. Unplug these and drive with the headlights on. Does that fix the flickering? If so, then the accessories are definitely to blame. You may need to find an alternate power source so that these gadgets don’t draw excessive amounts of power from essential components.
You need to go to a car mechanic to check if the engine is failing to communicate properly with the headlights. Unplugging accessories may also help. There’s an alternative route you can take: use a device to correct power distribution inconsistencies.
There aren’t many products to this regard. One great option is a Canbus error correction gadget. It essentially ensures that your headlights always get the power they require, even when you have something like a tire pressure monitoring system installed. Anti-flickering gadgets like this may help.
Some drivers find flickering headlights a nuisance, and others see it as a serious sign of car trouble. In any case, you shouldn’t drive with problem headlamps. First, you need to diagnose the problem. Use the tips given above to do so.
Once you know what’s wrong, apply the appropriate fix. You can do this at home depending on your skill level. It’s recommended to get your headlights fixed at a reliable auto mechanic shop.
Lastly, there are certain things you can do to safeguard against headlight flickering. Use an anti-flickering device like a Canbus to prevent issues and save money. However, such devices won’t fix all issues that lead to flickering, such as bad wiring or failing alternators.
Checking your car’s systems once in a while would help you diagnose problems early and prevent flickering. Maintain your car well, as it would certainly help.
Available to order here Carifex - Non-Flickering LED Headlight Set
]]>Carifex offers two distinct LED headlight options: the Non-Flickering LED headlights and the Compact LED Headlight Bulbs. Despite originating from the same brand, these two products have unique features and benefits.
Both the Non-Flickering and Compact LED headlights from Carifex provide excellent brightness. The Non-Flickering LED headlights offer 12,000 lumens, providing a bright and clear view of the road ahead1. The Compact LED Headlight Bulbs claim to deliver 400 times the brightness of regular headlights, providing 6,000 lumens per bulb.
The color temperature for both options is 6,500K, offering a bright white light that mimics daylight, enhancing visibility and safety while driving at night.
The Non-Flickering LED headlights from Carifex feature an all-in-one compact design and utilize the latest CSP chip technology, ensuring a perfect beam pattern without any dark spots or foggy light. This model is designed for easy installation, with no relay, no capacitor, no extra wiring, and no radio interference.
Carifex's Compact LED Headlight Bulbs also promise easy installation with a "plug and play" design. These headlights require no modifications to your vehicle's wiring harness and can be installed in 30 minutes or less. They are designed to fit all vehicles, including trucks, sedans, and SUVs.
The Non-Flickering LED headlights claim a lifespan of over 30,000 hours. They are also waterproof, dustproof, and shockproof, which can contribute to their longevity.
The Compact LED Headlight Bulbs from Carifex feature a supercharged CREE LED chip housed in a solid aluminum casing, ensuring efficient heat dissipation and a long lifespan. They claim a lifespan of 50,000 hours, providing reliable illumination over a longer period.
The Non-Flickering LED headlights are designed with advanced technology to prevent flickering and ensure non-interference with radio signals5.
The Compact LED Headlight Bulbs offer an enhanced beam pattern focused down towards the road, helping to avoid blinding other drivers. Additionally, when purchasing their high and low beams, Carifex provides bonus fog lights at no extra charge.
Both the Non-Flickering LED headlights and the Compact LED Headlight Bulbs come with impressive customer support and warranty terms. Carifex offers 24 months After Sale Support, 100 days free returns, fast shipping, and US-based support for both products, providing additional confidence to buyers about the quality and reliability of their products.
Both the Carifex Non-Flickering LED headlights and the Compact LED Headlight Bulbs offer superior brightness, easy installation, and enhanced visibility compared to traditional headlights. The choice between the two will likely come down to specific user needs and preferences.
If you prioritize a longer lifespan and the addition of free fog lights, the Compact LED Headlight Bulbs may be the better choice. If you prefer a non-flickering design that ensures non-interference with radio signals, then the Non-Flickering LED headlights would be a great option.
Both products have their unique selling points, and both seem to be reliable, high-quality choices for anyone looking to upgrade their vehicle's headlights.
]]>And what is that misconception, you may ask?
We’re here to tell you that no, LED headlights are in no way, shape or form illegal!
This erroneous assumption dates back to the introduction of LED headlights on the market, which found consumers puzzled as to whether their unique technology and light intensity could possibly be safe for use and not a danger to other drivers.
While it’s true that LED headlights provide increased brightness, they are NOT an on-road hazard. Drivers of vehicles fitted with LED headlights do see better on the road – but not to the expense of oncoming traffic.
There are, however, some things you need to take into consideration before choosing what is the best LED headlights bulbs set on the market.
As a law-abiding driver, you know that you are obligated to keep your vehicle within legal operating standards.
That means that, under no condition should you make any additions or alterations to your car that might make jeopardize your safety, or that of other drivers.
Though, as we previously mentioned, LED headlights are, in fact, legal, not all LED headlights brands to sell products that meet the mandated specifications for them to be safe for on-road use.
That means that their design is such that practically makes them dangerous, in the sense that they can reduce oncoming drivers’ visibility and even possibly lead to accidents.
To prevent facing such issues, you need to be careful before making any LED headlight bulbs purchase. Make sure you read through their features carefully to avoid buying a poor-quality product that may potentially cause harm.
Now that you know that LED headlights are legal, we encourage you to go forth and purchase them to enjoy their many, great benefits you have been missing out on for so long!
]]>So, if you have been looking for ways to make driving in fog easier, then you have certainly come across the option of replacing your car’s halogen bulbs with LED headlight bulbs.
The thing is, you most likely have heard a lot of things with regards to the performance of LED headlights – and you might be sceptical with regards to how much LED headlights can help you drive better in fog.
However, the facts speak for themselves: LED headlights are, indeed, better in fog, since they have a set of unique qualities that make them ideal to use not only in driving through fog, but in all weather conditions, too!
More specifically, LED headlights offer increased brightness, which helps penetrate through the veil of fog, illuminating your surroundings and helping you see more clearly as you go along your route.
This is one of the many great benefits of headlights, as no halogen light bulb can provide this strong and piercing light beam that can allow you to deal with whatever ambient environmental conditions you may come across on your trips.
If you are interested in finally taking the leap and purchasing the best LED foglight bulbs set on the market, then we encourage you to be wise and make a well-researched decision that will lead to a sound purchase.
Make sure the LED foglight bulbs set you choose is of top quality, fits your car, and increases your quality of life.
If your product of choice fits all these criteria, then get ready to start enjoying your car trips anew!
]]>This term, of course, refers to how bright the light emitted from the headlight bulbs is. However, it is often hard to differentiate between the most commonly used LED headlight bulbs, the 6000K LED headlight bulbs and the 8000K LED headlight bulbs, in terms of light intensity.
If you are among those who wonder which is the brighter LED headlight, that of 6000K or 8000K, then we are happy to provide you with the answer you are looking for!
While it might seem a bit odd, the 6000K LED headlights are brighter than the 8000K headlights – and there’s science to back this distinction.
Light intensity is measured in Kelvin units, which are abbreviated to K. Based on the unit’s definition, the higher the rating on the Kelvin scale, the more color in the light you get – however, this comes at the expense of visibility. Essentially, the higher the rating, the lower the visibility, which means that, should you choose higher-graded LED headlights, you are diminishing your ability to maintain a clear view of your surroundings, and as such you are not only making driving a lot harder but also a lot more dangerous, too.
Considering this, 6000K LED headlight bulbs emit bright white light with a hint of blue, while 8000K LED headlight bulbs produce light which is comparably less bright, and a tad bluer. What’s more, 6000K LED headlight bulbs are closer to what scientists call “pure white light”, making them significantly better than their 8000K counterparts, since they emit virtually all the spectrum of visible light.
Taking this into account, you can see why you should make the smart choice of getting 6000K LED headlights for your car, to ensure that you are getting the best light quality possible!
]]>On that which matters, you ask?
On the subject of which are the best LED headlight brands available on the market, of course!
If you make a quick online search, you’ll definitely come across various reviews and differing opinions on which is the top LED headlight brand – which is, of course, expected, since everyone has their own definition of what makes a product stand out.
However, there are some definitive factors that do, in fact, make certain LED headlights better than others – and some brands have managed to incorporate all those features into their LED headlight bulbs and turn them into highly popular choices among drivers.
So, which are said brands that are considered to be the best LED headlight brands available on the market?
The most popular answers to that question are Phillips and Sylvania.
Both these companies carry years of experience in the field of light fixtures and have amassed a considerable customer base owing to their strong, long-term presence in the market, as well as their innovative product launches throughout the years, which have left their mark in the industry, and paved the way for the development of new technologies.
Phillips and Sylvania are often mentioned as the best LED headlight brands available on the market, and, in the opinion of many, rightfully so, but Carifex is quickly emerging as a leader in the field, with its flagship product, the Carifex Premium LED Headlight Bulbs Set.
Our LED Headlight Bulbs Set has quickly gained popularity, reaching thousands of customers from across the globe who have made it their number one choice for replacing their car’s halogen lightbulbs and making the switch to LED technology.
We encourage you to purchase our LED Headlight Bulbs Set and see for yourself just what makes them unique, and the ideal car upgrade that will transform your driving experience!
]]>